Fujifilm EF-42 Owner's Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
EN-6
ENGLISH
Inserting Batteries
The EF-42 can be used with lithium, alkaline, and nickel-metal hy-
dride (NiMH) batteries. Choose NiMH batteries for reduced  ash
charging times and longer battery life.
1
Place your thumb in the depression at the
top of the cover and push the cover slightly
in to release the latch, then slide the cover
down to open it.
Q Before opening the cover, be sure the ON/OFF
switch is in the OFF position.
2
Insert four AA batteries in the orientation
shown on the inside of the cover. Close the
cover.
Q Although the battery chamber is designed to
prevent the batteries being inserted incor-
rectly, failure to insert the batteries in the cor-
rect orientation could result in malfunction.
3
Turn the  ash on. A beep will sound as the
ash starts charging. The  ash is ready for
use when charging is complete and the
ready lamp lights.
4
Turn the  ash o . The ready lamp will turn
o to show that the  ash will not  re.
Q Turn the  ash o before mounting it on the hot shoe. If the  ash is on, it
may short the hot shoe contacts, causing the  ash to  re unexpectedly or
other product malfunction.
Attaching the EF-42
Be sure the EF-42 is o before mounting it on or removing it from the
camera. Failure to observe this precaution could result in damage to
the camera.
1
Rotate the  ash lock ring to the right to release the lock.
2
Mount the  ash securely on the camera hot shoe.
3
Rotate the lock ring to the left to lock the  ash in place.
Q Be sure the release the lock before attaching the  ash. Attempting to at-
tach the  ash without releasing the lock could damage the hot shoe.
Auto Power O
If no operations are performed for 15 minutes while the  ash is on,
the displays will turn o and the  ash will be disabled. Normal opera-
tion can be restored by pressing the camera shutter button halfway
or turning the  ash o and then on again.
R The  ash continues to draw power from the batteries after the displays
have turned o automatically. To reduce the drain on the batteries, turn
the  ash o when it is not in use.
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

Comments to this Manuals

No comments