Fujifilm FinePix Real 3D V3 User Manual download pdf (Page 28)

Connecting the Viewer to an HDMI Device

When connected to a FinePix Real 3D W3 camera or other HDMI device using an HDMI

cable (available separately from third-party suppliers), the viewer can be used to display

C and D images.

Turn the viewer on.

Turn the HDMI device on and enable HDMI output.

Connect the HDMI cable as shown.

Type A HDMI plug

HDMI connector

HDMI cable

Q An HDMI cable can not be connected while a USB cable is connected.

Q HDMI output is available only with cables that conform to the HDMI standard.

Q Use a high-speed cable for C display.

R The viewer will suspend operation when the cable is connected and the output from the

HDMI device will appear in the display.

The viewer will display images played back on the HDMI device. The following opera-

tions can be performed:

• To raise or lower volume, press the VOLUME (e/b) buttons on the remote control

or press the g or h buttons on the viewer (the volume indicator will not be dis-

played)

• To adjust brightness, rotate the viewer brightness control

R Choose from Auto and Side by Side HDMI 3D display modes using the HDMI Setting op-

tion in the viewer setup menu (P 19).

R For information on using the HDMI device, see the documentation provided with the

equipment.

The HDMI Connector

• Image signal input:

480/60p, 720/60p, 1080 /60i

Frame packing 720/60p, 1080/24p

Side-by-side 1080 /60i

Top and bottom 720/60p, 1080/24p

• Audio signal input: Linear PCM with a sampling frequency of 32, 44.1, or 48kHz.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Fujifilm FinePix Real 3D V3 User Manual Page 28