Fujifilm FinePix E900 User Manual download pdf (Page 7)

12 13

Getting Ready

LOADING THE BATTERIES AND THE MEDIA

Press on the battery cover to push the batteries

down. Slide the battery cover closed.

◆

How to replace the xD-Picture Card

◆

Push the xD-Picture Card into the slot and then

slowly remove your finger. The lock is released and

the xD-Picture Card is pushed out.

Gold marking

Gold contact area

Align the gold marking on the xD-Picture Card slot

with the gold contact area on the xD-Picture Card

and push the card firmly all the way into the slot.

●

If the xD-Picture Card is oriented incorrectly, it will not go all

the way into the slot. Do not apply force when inserting an

xD-Picture Card.

Load the batteries correctly as indicated by the

polarity icons.

●

Depending on the camera mode and the type of batteries used, the transition from “C” to “V” may occur more

quickly.

●

Due to the nature of the battery, the battery level warning may appear early when the camera is used in cold

locations. This is normal. Try warming the batteries in your pocket or a similar location before use.

✽ Battery level warning

1) The camera’s estimation of the remaining battery charge varies greatly depending on the camera operation mode.

Consequently, even if “

C” or “V” is not displayed in Playback mode, one of them may appear when you change

to Photography mode.

2) Depending on the battery type and the level of charge in the batteries, the camera may run out of power without first

displaying a battery level warning. This is particularly likely to happen when batteries that have run out of charge

once are re-used.

In situation 2), immediately load new or fully charged replacement batteries.

Turn the camera on and check the battery charge.

Checking the battery charge

“C” appears as a small icon on the left-hand side

of the LCD monitor. “V” appears as a large icon

in the center of the LCD monitor.

1There is ample battery charge.

2There is insufficient charge left in the batteries.

The batteries will soon run out. Have a new set

of batteries ready.

3The batteries are depleted. The display will

shortly go blank and the camera will stop

working. Replace or recharge the batteries.

Blinking red

Lit red

No icon

Blinking red

Lit red

◆

Auto power off function

◆

When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this function

turns the camera off (➡P.96). To turn the camera back on, press the “POWER” button. To play back

images, hold down the “

w” button for about 1 second.

1 2 3 4 5 6 7 8 9 10 11 12 ... 68 69

Comments to this Manuals

No comments

Fujifilm FinePix E900 User Manual Page 7

Comments to this Manuals

Related products and manuals for Cameras Fujifilm FinePix E900