Fujifilm FinePix E900 User Manual download pdf (Page 61)

120 121

Power Supply and Batteries

Always use the AC Power Adapter AC-3VX (sold

separately). The use of an AC power adapter other

than AC-3VX can be damaged to your digital camera.

h Use the AC power adapter for indoor use only.

h Plug the connection cord plug securely into the DC

input terminal of the FUJIFILM Digital camera.

h Turn off the FUJIFILM Digital camera before

disconnecting the cord from the FUJIFILM Digital

camera’s DC input terminal. To disconnect, pull out

the plug gently. Do not pull on the cord.

h Do not use the AC power adapter with any device

other than your camera.

h During use, the AC power adapter will become hot

to the touch. This is normal.

h Do not take apart the AC power adapter. Doing so

could be dangerous.

h Do not use the AC power adapter in a hot and

humid place.

h Do not subject the AC power adapter to strong

shocks.

h The AC power adapter may emit a humming. This is

normal.

h If used near a radio, the AC power adapter may

cause static. If this happens, move the camera away

from the radio.

AC Power Adapter

■ Battery Charger BC-NH02 Specifications

Rated input 100-240 V AC, 50/60 Hz

Input capacity 100-240 V -0.08 A

Rated output 1.2 V DC, 550 mA × 2

Applicable batteries AA-size Ni-MH Battery × 2

Charging time Approx. 5 hours

Dimensions 70 mm × 65 mm × 23.3 mm

(2.8 in. × 2.6 in. × 0.9 in.)

(L × W × D)

Mass (Weight) Approx. 60 g (2.1 oz.)

(excluding batteries)

Operating 0°C to + 40°C

temperatures (+ 32°F to + 104°F)

h There may be vibration noises from inside the

battery charger during use. This is normal.

h Do not use the battery charger to charge batteries

other than Ni-MH batteries.

h The battery charger could cause interference if

placed close to a radio during charging. In this

event, move the radio and charger further apart.

h Do not leave the battery charger in the following

types of locations:

i Extremely humidity or high temperatures, such as

close to a heating appliance or in direct sunlight

i Places with strong vibration

i In very dusty places

h The battery charger accepts input voltages of 100-

240 V AC at 50 or 60 Hz and can be used all over

the world. However, the shape of the plug and

socket-outlet depends on the country of use.

Consult your travel agent for details.

h Ni-MH batteries or the battery charger itself will

become warm due to the power stored inside the

batteries. This is normal and does not indicate a

fault. Wherever possible, use the battery charger in

a well-ventilated location.

Notes on Using the Battery Charger

Notes on the xD-Picture Card™

■ Image Memory Card

h This Image Memory Card is a new image

recording media (xD-Picture Card) developed

for digital cameras. The Image Memory Card

consists of a semiconductor memory (NAND-

type flash memory) to record digital image data.

The recording process is electrically performed

and enables erasure of existing image data as

well as re-recording of new image data.

h When using a new Memory Card, or a Memory

Card that has been formatted by a PC, be sure

to format the card with your digital camera

before using it.

■ Protecting Your Data

h Images and movies may be lost or destroyed in the

following situations. Please note that FUJIFILM

assumes no responsibility for data that is lost or

destroyed.

1. Removal of the memory card or turning the power

off while the memory card is being accessed (i.e.,

during record, erase, initialization, and playback

operations).

2. Improper handling and use of the memory card by

the user or third party.

h Save your important data to another media (i.e., MO

disk, CD-R, hard disk, etc.).

■ Handling xD-Picture Card

h When storing xD-Picture Cards, make sure that

they are kept out of the reach of children. An xD-

Picture Card could be swallowed cause suffocation.

If a child swallows an xD-Picture Card, seek

medical attention or call emergency number right

away.

h When inserting the xD-Picture Card into the

camera, hold the xD-Picture Card straight as you

push it in.

h Do not expose an xD-Picture Card to shock. Do not

apply pressure, and avoid bending.

h Do not use or store xD-Picture Card in hot and

humid places.

h Clean the xD-Picture Card with a soft dry piece of

cloth when dirty.

h When carrying or storing an xD-Picture Card, keep

it in the special protective case.

h The xD-Picture Card will work well for long time, but

will sooner or later lose its ability to store and play

back images or movies. If this happens replace it

with a new xD-Picture Card.

h Never remove the xD-Picture Card or turn the

camera off during data recording or erasing (xD-

Picture Card formatting) as this could be damaged

to the xD-Picture Card.

h The use of xD-Picture Cards is recommended with

the FinePix E900.

The recording quality cannot be guaranteed when

xD-Picture Cards other than those manufactured by

FUJIFILM are used.

h The xD-Picture Card may feel warm when it is

removed from the camera after taking pictures. This

is normal.

h Do not put labels on the xD-Picture Card. Peeling

labels can cause the camera not to work properly.

■ Using xD-Picture Card with a PC

h When taking pictures using an xD-Picture Card that

has been used on a PC, reformat the xD-Picture

Card using your camera for best quality.

h When formatting an xD-Picture Card, a directory

(folder) is created. Image data is then recorded in

this directory.

h Do not change or delete the directory (folder) or file

names on the xD-Picture Card because this will

make it impossible to use the xD-Picture Card in

your camera.

h Always use the camera to erase image data on an

xD-Picture Card.

h To edit image data, copy the image data to the PC

and edit the copy.

■ Specifications

Type Image memory card for digital

cameras (xD-Picture Card)

Memory type NAND-type flash memory

Conditions for use Temperature:

0°C to +40°C

(+32°F to +104°F)

Humidity:

80% max. (no condensation)

Dimensions 25 mm × 20 mm × 2.2 mm

(0.98 in. × 0.79 in. × 0.09 in.)

(W × H × D)

h As a power source in digital cameras, AA-size Ni-

MH batteries (referred to hereafter as Ni-MH

batteries) are superior to alkaline batteries in several

ways, such as allowing more shots to be taken with

the camera. However, care must be taken with the

way Ni-MH batteries are used if their original

performance is to be maintained.

h Ni-MH batteries left unused in storage for long

periods can become “deactivated”. Also, repeatedly

charging Ni-MH batteries that are only partially

discharged can cause them to suffer from the

“memory effect”.

Ni-MH batteries that are “deactivated” or affected by

“memory” suffer from the problem of only providing

power for a short time after being charged. To

prevent this problem, discharge and recharge them

several times using the camera’s “Discharging

rechargeable batteries” function. By repeating this

cycle several times, the temporary reduction in

performance caused by “memory” or “deactivation”

can be remedied and the batteries can be restored

to their original performance levels.

Deactivation and memory are specific to Ni-MH

batteries and are not in fact battery faults. See P.18

for the procedure for “Discharging rechargeable

batteries”.

Do not use the “Discharging rechargeable

batteries” function when alkaline batteries being

used.

h To charge Ni-MH batteries, use the Battery Charger

BC-NH02 (included). Refer to P.10 to make sure

that the charger is used correctly.

h Do not use the battery charger to charge other

batteries.

h Note that the batteries feel warm after being

charged.

h Due to the way the camera is constructed, a small

amount of current is used even when the camera is

turned off. Note in particular that leaving Ni-MH

batteries in the camera for a long period will

overdischarge the batteries and may render them

unusable even after recharging.

h Ni-MH batteries will self-discharge even when not

used, and the time for which they can be used may

be shortened as a result.

h Ni-MH batteries will deteriorate rapidly if

overdischarged (e.g. by discharging the batteries in

a flashlight). Use the “Discharging rechargeable

batteries” function provided in the camera to

discharge the batteries.

h Ni-MH batteries have a limited service life. If a

battery can only be used for a short time even after

repeated discharge-charge cycles, it may have

reached the end of its service life.

Using the AA-size Ni-MH Batteries

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68 69

Comments to this Manuals

No comments

Fujifilm FinePix E900 User Manual Page 61

Comments to this Manuals

Related products and manuals for Cameras Fujifilm FinePix E900