Fujifilm z100 Owner's Manual Page 134

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 133
134
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed Explanation Remedy
(Lit red)
V (Blinking red)
The battery is low or completely out of charge. Charge the battery or load fully charged battery.
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. We recommend using a
tripod.
(Lit red)
*The shape of the AF
frame differs depending
on the setting in the
[SHOOTING MENU].
The AF (autofocus) cannot work effectively. If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
Use AF lock to take the picture (p.33).
Select Macro mode when taking close-up shots.
Aperture/
Shutter speed display
(Lit red)
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
[FOCUS ERROR]
[ZOOM ERROR]
[LENS CONTROL
ERROR]
Camera malfunction or fault. Turn the camera on again, taking care not to touch
the lens.
Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
[NO CARD]
Memory Card is not inserted when transferring
images.
Insert a Memory Card.
[CARD NOT INITIALIZED]
The Memory Card or internal memory is not
formatted.
The Memory Card contact area is soiled.
Camera fault.
Format the Memory Card or internal memory on
the camera (p.111).
Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (p.111). If the message still
appears, replace the Memory Card.
Contact your FUJIFILM dealer.
{
Page view 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 163 164

Comments to this Manuals

No comments