Fujifilm FinePix F480 Owner's Manual Page 108

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 107
108
Warning Displays
[CARD ERROR]
The Memory Card contact area is soiled.
The Memory Card format is incorrect.
Camera fault.
The Memory Card is damaged.
Inserted Memory Card is not compatible with your
camera.
Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (p.84). If the message still
appears, replace the Memory Card.
Contact your FUJIFILM dealer.
Insert a compatible Memory Card that is operation-
checked at FUJIFILM Corporation ( p.16).
[\ MEMORY FULL]
[Y MEMORY FULL]
The internal memory or Memory Card is full. Erase some images in internal memory or Memory
Card (p.36), or use a Memory Card that has ample
free space.
[WRITE ERROR]
The data could not be recorded due to a Memory
Card error or a connection error between the
Memory Card and camera.
The image cannot be recorded as it is too large to
fit in the available space on the Memory Card.
The Memory Card or internal memory is not
formatted.
Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
contact your FUJIFILM dealer.
Use a new Memory Card.
Format the Memory Card or internal memory on
the camera (p.84).
[PROTECTED CARD]
The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back ( p.17).
[INTERNAL MEMORY IS
FULL]
[INSERT A NEW CARD]
The data could not be recorded or copied since the
internal memory is full.
Erase some images from the internal memory
( p.36), or use a Memory Card that has ample free
space.
[BUSY]
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
Use a Memory Card that was formatted on the
camera.
[FRAME NO. FULL]
The frame number has reached 999-9999. A Insert a formatted Memory Card into the camera.
B Set [RENEW] as the [FRAME NO.] setting in the
[ SET-UP] menu (p.81).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set [CONT.] as the [FRAME NO.] setting in the
[ SET-UP] menu.
Warning Displayed Explanation Remedy
Page view 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 131 132

Comments to this Manuals

No comments