Fujifilm FinePix F100fd User Manual Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 166
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
137
Appendices
[CARD ERROR]
The Memory Card contact area is soiled.
The Memory Card format is incorrect.
Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (p.113). If the message still
appears, replace the Memory Card.
Camera fault.
The Memory Card is damaged.
Inserted Memory Card is not compatible with your
camera.
Contact your FUJIFILM dealer.
Insert a compatible Memory Card that is
operationchecked at FUJIFILM Corporation.
[\ MEMORY FULL]
[Y MEMORY FULL]
The internal memory or Memory Card is full. Erase some images in internal memory or Memory
Card (p.45), or use a Memory Card that has ample
free space.
[WRITE ERROR]
The data could not be recorded due to a Memory
Card error or a connection error between the
Memory Card and camera.
The image cannot be recorded as it is too large to
fit in the available space on the Memory Card.
The Memory Card or internal memory is not
formatted.
Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
contact your FUJIFILM dealer.
Use a new Memory Card.
Format the Memory Card or internal memory on
the camera (p.113).
[PROTECTED CARD]
The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back (p.20).
[INTERNAL MEMORY IS
FULL
INSERT A NEW CARD]
The data could not be recorded or copied since the
internal memory is full.
Erase some images from the internal memory
(p.45), or use a Memory Card that has ample free
space.
[r BUSY]
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
Use an Memory Card that was formatted on the
camera.
[FRAME NO. FULL]
The frame number has reached 999-9999.
No more pictures can be taken.
A Insert a formatted Memory Card into the camera.
B Set [RENEW] as [FRAME NO.] setting in the [U
SET-UP] menu (p.111).
C Start taking pictures (The frame number starts
from “100-0001”).
Warning Displayed Explanation Remedy
Continued Q
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 165 166

Comments to this Manuals

No comments