Fujifilm FinePix S3 User Manual download pdf (Page 53)

104 105

Settings

SET-UP

SETTING THE CUSTOM WB

COLOR SPACES

Use this function to set the correct white balance for a light source. You can also use this

function to achieve a desired special effect.

Press the “F1” (custom WB 1) button or the “F4” (custom WB 2) button to select the custom

white balance you want to set.

CUS.2

Custom WB 1 Custom WB 2

Turn the focus mode selector switch to “M” (Manual

focus) and set the focus manually.

Set the exposure mode to “P”, “S” or “A”.

●

The camera’s auto focus function may be unable to focus on

a subject such as a white sheet of paper, which will prevent

the shutter from operating.

●

While a custom white balance can also be measured in “M”

mode, the image may be extremely overexposed or

underexposed so that the optimum measurement is not

taken.

Hold up a page of white paper or a similar object

under the target light source so that the paper

fills the viewfinder screen. Then press the shutter

button to set the custom white balance.

h Range of custom WB settings

Color temperatures from approx. 2800 K to

9500 K

If the exposure is measured correctly,

“7” appears on the LCD monitor.

Press the “MENU/OK” button to confirm the setting.

Selects the color space used when pictures are

taken. For normal photography, select sRGB.

Adobe RGB (1998) is best for images to be used

for commercial printing.

WIDE: Allows photography using a wide dynamic

range that takes advantage of the particular

characteristics of the Super CCD SR II. The

continuous shooting speed and interval are

slower than for standard mode (roughly

double), so the number of continuous shots

available roughly half.

STANDARD: The dynamic range is 100%, as on

the previous digital camera (FinePix

S2 Pro), but the continuous shooting

speed and the number of continuous

shots available are increased for

easier shooting.

●

After taking the picture, check the color tones (white balance)

in the image.

i Select “PREVIEW” as the photographed image display

option (➡P.103) in the SET-UP screen.

i Press the “PLAY” button (➡P.43).

When you have finished setting the white balance, select the

focus mode you want to use.

■ When the exposure is not measured correctly

Remedy

The subject is too bright. Use a negative (–) exposure compensation value and set the

white balance again.

The subject is too dark. Use a positive (+) exposure compensation value and set the white

balance again.

Because the exposure is outside the range of valid custom white balance settings, the

maximum (or minimum) value has been set.

h Available custom WB settings: Color temperatures of approx. 2800 K to 9500 K

ＣＯＭＰＬＥＴＥＤ！ＣＯＭＰＬＥＴＥＤ！

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

4 5

ＣＵＳＴＯＭＷＢ：ＳＥＴ

ＣＯＬＯＲＳＰＡＣＥＳｓＲＧＢＣＯＬＯＲＳＰＡＣＥＳｓＲＧＢ

Ｄ−ＲＡＮＧＥ：ＷＩＤＥＤ−ＲＡＮＧＥ：ＷＩＤＥ

ＩＭＡＧＥＤＩＳＰ．：ＯＦＦＩＭＡＧＥＤＩＳＰ．：ＯＦＦ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

D-RANGE

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

4 5

ＣＵＳＴＯＭＷＢ：ＳＥＴ

ＣＯＬＯＲＳＰＡＣＥＳ：ｓＲＧＢＣＯＬＯＲＳＰＡＣＥＳ：ｓＲＧＢ

Ｄ−ＲＡＮＧＥＷＩＤＥＤ−ＲＡＮＧＥＷＩＤＥ

ＩＭＡＧＥＤＩＳＰ．：ＯＦＦＩＭＡＧＥＤＩＳＰ．：ＯＦＦ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

◆

Matching customized white balance using an external flash

◆

If you use an external flash with the exposure mode set to “M”, you can make it easier to match the

white balance to the photography settings (aperture, flash brightness, etc.) by using a commercially

available 18% grey standard chart instead of white paper.

✽ How to display the SET-UP menu (➡P.101)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 72 73

Comments to this Manuals

No comments

Fujifilm FinePix S3 User Manual Page 53

Comments to this Manuals

Related products and manuals for Bridge cameras Fujifilm FinePix S3