Fujifilm FinePix S3 User Manual download pdf (Page 39)

76 77

Advanced Photography

WHITE BALANCE

PHOTOGRAPHY FUNCTION MENU

Change the settings when you want to set the white balance to suit the natural or artificial lighting

conditions when you shoot.

When AUTO is selected, the correct white balance sometimes cannot be obtained under special

light sources or for subjects where people’s faces are highlighted, etc. In such cases, select the

correct white balance setting for the light source.

h Factory default setting: AUTO

h When the flash fires, the white balance setting (excluding custom white balance) for the flash is used.

Consequently, to achieve a particular effect, the flash mode should be set to Suppressed flash.

Display Name Description

AUTO

The camera automatically determines the amount of light and the color information for the

shot and takes the picture with a natural white balance.

Fine

Select this setting for outdoor shots in fine weather when the light source for the shot is the

sun.

Shade Select this setting for shots taken in shade or on cloudy days.

Fluorescent 1 Select this setting for shots taken under “Daylight” fluorescent lamps.

Fluorescent 2 Select this setting for shots taken under “Warm White” fluorescent lamps.

Fluorescent 3 Select this setting for shots taken under “Cool White” fluorescent lamps.

Incandescent Select this setting for shots when the light source is incandescent bulbs or lights.

Custom 1

This setting uses the white balance setting specified by the photographer in the “SET-UP”

menu (➡P.104).

Custom 2

ISO200ISO200

09 / 23 / 200409 / 23 / 2004

10 : 00 AM10 : 00 AM

Press the “FUNC”

button to switch

between functions.

White balance

USING THE FUNCTION MENU WHEN TAKING PICTURES

PHOTOGRAPHY FUNCTION MENU

You can use the Function menu to change the quality settings (White Balance, Quality, Resolution,

Film simulation, Dynamic range, Color, Tone, Sharpness) of saved images and the AF area

settings.

Turn the camera on and set the camera to Photography mode. If the Auto Power Off function

has turned the camera off, press the shutter button down halfway to turn it back on.

ISO200

09 / 23 / 2004

10 : 00 AM

The setting changes each time you press the button.

The settings can be changed by holding down the

button and pressing “a” or “b”.

Method 1

Method 2

The functions change each time the

“FUNC” button is pressed.

WHITE BALANCE

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 72 73

Comments to this Manuals

No comments

Fujifilm FinePix S3 User Manual Page 39

Comments to this Manuals

Related products and manuals for Bridge cameras Fujifilm FinePix S3