Fujifilm S8000 Owner's Manual download pdf (Page 132)

132

Connecting to a PC

CAUTION

• FinePix S8000fd is compatible with PTP (Picture

Transfer Protocol)/MTP (Media Transfer Protocol). A

PTP/MTP-compatible camera is a camera that can

recognize the PC and printer automatically when

connected.

• Do not disconnect the USB cable (included) when the

camera is communicating with a PC. If the USB cable

(included) is disconnected during communication, the

files on the Memory Card or internal memory may be

damaged.

• In Mac OS X, you must set automatic setup the first time

you connect the camera to your PC.

• When the camera and PC are exchanging data, the

indicator lamp blinks alternately green and orange.

• Auto power off is disabled during USB connection.

• Before replacing the Memory Card, always disconnect

the camera from the PC.

• The camera and PC may be exchanging data even

when [Copying] disappears from your PC screen.

Before disconnecting the USB cable (included), always

check that the indicator lamp is off.

• Always use FinePixViewer to transfer images with voice

memos to a PC.

• The cost of an Internet provider for connecting to the

internet is the user’s responsibility.

• When using FinePixViewer to save images on a data

server (network), FinePixViewer may not run as it would

in a standalone PC environment.

CAUTION

• Always use the FUJIFILM AC Power Adapter AC-5VX

(sold separately). If the camera suddenly loses power

during data exchange, data exchange will not be

performed correctly, and the Memory Card or internal

memory could be damaged.

• Make sure that the USB cable (included) is connected

correctly and securely.

• Connect the camera directly to the PC using the USB

cable (included). The software may not operate

correctly when you use an extension cable, or if you

connect the camera via a USB hub.

• When your PC has more than one USB port, the

camera can be connected to either port.

• When Windows 98 SE is used, the supplied software

must be installed first before connecting the camera to

a PC using the USB cable. The PC will not recognize

the camera if it is connected before installation.

• A memory Card, the internal memory, data in a Memory

Card or data in the internal memory could be damaged

if any of the following are performed;

- the USB cable is disconnected

- POWER switch or buttons are pressed

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 163 164

Comments to this Manuals

No comments

Fujifilm S8000 Owner's Manual Page 132

Comments to this Manuals