Fujifilm FinePix 6800 Zoom User Manual download pdf (Page 59)

117116

Warning Displays e The table below lists the warnings that are displayed on the LCD monitor

Warning Displayed

Explanation Remedy

The camera battery is low on charge.

No SmartMedia is loaded, or it is

loaded incorrectly.

•

The SmartMedia is not formatted.

• The SmartMedia terminals are

soiled.

• The SmartMedia terminals are

soiled.

• The SmartMedia is damaged.

• The SmartMedia format is

incorrect.

The SmartMedia is fully recorded.

The SmartMedia is write-protected.

•

An attempt was made to playback a

frame not recorded on this camera.

• The SmartMedia terminals are

soiled.

Replace or recharge the battery.

Load the SmartMedia (3.3V) in the correct

direction.

• Format the SmartMedia.

• Wipe the contact area on the SmartMedia

with a soft dry cloth.

Wipe the contact area on the SmartMedia

with a soft dry cloth. It may be necessary to

format the SmartMedia. If the error message

is still displayed, replace the SmartMedia.

Use a SmartMedia that is not write-protected.

• Images cannot be played back.

•

Wipe the contact surface on the SmartMedia

thoroughly with a soft, dry cloth. In some cases,

you may have to format the SmartMedia.

Erase some images or use a SmartMedia

that has ample free space.

LCD Monitor

display

panel

Notes on the SmartMedia

™

●

Do not use or store SmartMedia in very hot, humid or

corrosive environments.

●

Take care not to touch the SmartMedia’s contact area

or allow the area to become soiled. Use a dry lint-free

cloth to wipe away any soiling that does occur.

●

To avoid damage caused by static electricity, always

use the special static-free case provided during

transportation or storage, or keep the SmartMedia in

a storage case if available.

●

Do not carry SmartMedia in locations such as a

trouser pocket. This could subject the SmartMedia to

excessive force when you sit down, thereby

damaging the SmartMedia.

●

The SmartMedia may feel warm when it is removed

from the camera after extended periods of picture

taking or image viewing. This is normal and does not

indicate a fault.

●

Inserting a SmartMedia that is charged with static

electricity into your camera may result in a camera

malfunction. If this occurs, switch the camera off and

then on again.

●

Affix the label onto the designated area of the card.

Do not use third-party labels as this can lead to

problems when the card is inserted or removed.

●

When you attach the label, take care that it does not

cover any of the write-protect area.

■Notes on Using SmartMedia with a PC

●

If you intend to take photos using a SmartMedia that

has been used on a PC, format the SmartMedia on

your camera.

●

When you format a SmartMedia in the camera and

then shoot and record images, a directory (folder) is

automatically created. Image data is then recorded in

this directory.

●

Do not change or delete the directory (folder) names

or file names on the SmartMedia from your PC as this

will make it impossible to use the SmartMedia in your

camera.

●

Always use the camera to erase image data on a

SmartMedia.

●

To edit image data, copy the image data to the PC’s

hard disk and then edit the copied data.

■Specifications

Type

Image memory card for digital cameras

(SmartMedia)

Operating voltage 3.3V

Operating conditions

Temperature:

0°C to +40°C (+32°F to +104°F)

Humidity:

80% or less (condensation free)

Dimensions 37 mm × 45 mm × 0.76 mm

(1.45 in. × 1.77 in. × 0.03 in.) (W × H × D)

(Lit red)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Comments to this Manuals

No comments

Fujifilm FinePix 6800 Zoom User Manual Page 59

Comments to this Manuals

Related products and manuals for Bridge cameras Fujifilm FinePix 6800 Zoom