- 3 -
FUJICOLOR CRYSTAL ARCHIVE PAPER SUPREME <NEW> FUJIFILM PRODUCT INFORMATION BULLETIN
7.
USE WITH
FRONTIER 330/340/350/355/
370/ 375/390/570
It is necessary to adjust for the paper type for each
paper magazine by changing the paper “Type”
specification in the “Paper Magazine Registration”
menu.
<Changing Paper Type Specification of Paper
Magazine for Frontier 330/350/370/390>
1 Log in to the “4 Setup and Maintenance” menu with
“SE2” for the user name, and a password of “7777”.
2 Select “5 Printer Adjustment/Maintenance” - “1
Paper Magazine Registration” (Menu 451) and
change the paper type to “C” as shown in the table
below.
Paper Type
CRYSTAL ARCHIVE PAPER SUPREME <NEW>
C
CRYSTAL ARCHIVE PAPER
E
3 Select “2 Print Condition Setup and Check” – “1 Paper
Condition Setup” (Menu 421) and perform a paper
condition setup for all magazines for which the paper
types were changed.
* It is important to click the “Initialize” button to
initialize the settings before making the paper
condition setup. After initialization, the first paper
condition setups will deviate by a great degree,
but this will be balanced after the second or third
attempt. (Please note that clicking the “Initialize”
button will not be possible if you do not log in with
a user name of lab administrator or higher.)
<Changing Paper Type Specification of Paper
Magazine for Frontier 340/355/375/570>
1 Log in to the “Setup and Maintenance” with the
Password “7777”.
2 Click the [Setup and Maintenance] - [02 Print
Condition Setup and Check] - [0221 Paper
Magazine Registration]. Change the paper type to
“C” as shown in the table below.
Paper Type
CRYSTAL ARCHIVE PAPER SUPREME <NEW> C
CRYSTAL ARCHIVE PAPER E
3 Click the [Setup and Maintenance] - [02 Print
Condition Setup and Check] - [0200 Paper Condition
Setup] buttons and perform a paper condition setup
for all magazines for which the paper types were
changed.
* It is important to click the “Initialize” button to
initialize the settings before making the paper
condition setup. After initialization, the first paper
condition setups will deviate by a great degree,
but this will be balanced after the second or third
attempt. (Please note that clicking the “Initialize”
button will not be possible if you do not log in with
a user name of lab administrator or higher.)
8. USE WITH FA/FA COMPACT SERIES
Since cyan forming dye has been modified in
CRYSTAL ARCHIVE PAPER SUPREME <NEW>, a
problem may arise when this paper is used on the
printing condition settings made using the
densitometer (QT-600) built into Fuji Minilab FA/FA
compact series. When CRYSTAL ARCHIVE PAPER
SUPREME <NEW> is used with FA/FA compact
series of Minilabs, it is necessary to set the printing
conditions using the “ring-around print” method or
another densitometer.
9. PAPER SURFACE AVAILABLE
Glossy and Lustre
10. SIZES AVAILABLE
Rolls
75m(246ft) 150m(429ft) 380m(1246ft) 400m(1312ft) 415m(1361ft)Length
Width
G L G L G L G L G L
8.9 cm(3.5in.)
10.2 cm(4in.)
12.0 cm(4.7in.)
11.4 cm(4.5in.)
12.7 cm(5in.)
15.2 cm(6in.)
17.8 cm(7in.)
20.3 cm(8in.)
25.4 cm(10in.)
30.5 cm(12in.)
G: Glossy L: Lustre
NOTES
Size availability may change without prior notice.
11. CONTROL STRIPS
Processing control can be provided through the use of
FUJICOLOR PAPER CRYSTAL ARCHIVE Control
Strips - Process CP-40FA/43FA/47L/48S/49E.
* When using CRYSTAL ARCHIVE PAPER
SUPREME <NEW>, the LD value may slightly
increase in control strips with some processing
chemicals. However, there is no problem in
processing performance.
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals