Fujifilm 1041484 Datasheet Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
– 2 –
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR CRYSTAL ARCHIVE PAPER
If exposed paper remains unprocessed for extended
periods of time under normal room conditions or is
subjected to high temperature and/or high humidity,
changes in the color balance and other properties
may occur.
The time between exposure and development
should be fixed in order to obtain consistent quality.
Avoid waiting until the next day to develop the ex-
posed paper. Rather than holding the paper for pro-
cessing the next day, initiate processing as soon as
possible.
4. PROCESSING
This paper is designed for use with FUJICOLOR Paper
Process CP-40FA, CP-43FA, CP-47L, CP-48S, and
CP-49E, or RA-4 type processes.
5. POST-PROCESSING PAPER (PRINT)
HANDLING/STORAGE
Since prints are usually used for the long-term recording
of images, as much effort as possible is made to use
materials that exhibit the least amount of change over
time, but the effects of light, heat, oxygen in the air, con-
taminating gases, humidity and mold cannot be com-
pletely avoided. It is possible, however, to minimize the
change in the photographic image or base material by
maintaining the appropriate storage conditions for
prints, such as those used by museums and art galler-
ies. Temperature and humidity control is the most im-
portant key to minimizing the change that occurs in
prints. Prints stored in the dark under the following con-
ditions may be expected to show almost no change
over time.
More than 20 years Below 10°C (50°F) 30% — 50%
10 — 20 years Below 25°C (77°F) 30% — 50%
Temperature Relative Humidity
Storage Period with
Almost No Change
Notes on Print Storage
1 Prints should be inserted into albums, mounted, or
placed into a bag (plastic*) for photographic prints
before being stored.
2 Even during normal storage, it is recommended that
prints be stored at a place as free as possible from
hot and humid conditions, and away from direct sun-
light and other strong light or from direct illumination.
The following are examples of undesirable storage
conditions.
Storage in a room closet facing a wall exposed
to cold outside air (which may cause condensa-
tion).
Storage in a place near the ceiling, such as an
attic, the top of a closet or cupboard (where high
temperatures may occur).
3 Storing prints with their front surfaces facing each
other may result in unexpected problems. For this
reason, prints should be stored with their front sur-
faces facing away from each other. If the adjacent
print placement is unavoidable, it is necessary to
keep the surfaces separated by, for example, the use
of interleaving sheets of paper.
6. LIGHT SOURCES FOR VIEWING
When inspecting finished color prints, it is essential that
an illumination source be used that has superior spec-
tral characteristics, adequately high color temperature
and sufficient brightness. This is because results can
appear different, depending on light quality. For precise
results, prints should be examined under the conditions
designated by ISO 3664-2000. As a general guide, the
following conditions are recommended.
Color Temperature : 5000±300 K
Average Illumination : 500 Lux or more
General Color Rendering Index: Ra 90 or more*
* To attain these values, special fluorescent lamps designed
for color evaluation (e.g. EDL type) should be used.
When inspecting finished prints, be careful to shut out
all external light and colored reflected light.
7. USE WITH FRONTIER 3**/5**/7**
Please refer to the following calibration data as a gen-
eral guide when using FUJICOLOR CRYSTAL ARCHIVE
PAPER on a digital printer.
*Made of polyester, polystyrene, polyethylene,
or polypropylene plastic, etc.
All Frontiers requires a dedicated LUT when printing.
your local distributor.
and higher For availability of this CD, please contact
This dedicated LUT is available on installer A3, version J
Page view 1
1 2 3 4 5 6

Comments to this Manuals

No comments