Fujifilm FinePix E500 User Manual download pdf (Page 36)

70 71

Settings

ＣＡＮＣＥＬＣＡＮＣＥＬＯＫＯＫ

ＳＥＴＳＥＴ

ＦＯＲＭＡＴＦＯＲＭＡＴ

ＦＯＲＭＡＴＯＫ？ＦＯＲＭＡＴＯＫ？

ＥＲＡＳＥＡＬＬＤＡＴＡＥＲＡＳＥＡＬＬＤＡＴＡ

When this function is enabled and the camera is

not used for 60 seconds, the screen temporarily

turns off (sleep mode) and the viewfinder lamp

blinks at 1-second intervals to save power. If the

camera remains unused for 2 or 5 minutes, it is

turned off. Use this function when you want to get

the maximum possible running time from your

batteries.

●

The Power save setting is disabled during automatic

playback and when a USB connection is being used.

POWER SAVE SETTING

◆

To restore power to the camera

◆

When the Power save function (2 or 5 minutes

setting) has shut the camera down:

Press the “POWER” button.

FORMAT

Initialize (format) the xD-Picture Card for use with

the camera.

Because initializing the xD-Picture Card erases all

the frames (files), including protected frames (files).

Back up important frames (files) onto your PC or

another media.

1Press “d” or “c” to select “OK”.

2Pressing the “MENU/OK” button erases all the

frames (files) and initializes the xD-Picture

Card.

●

If “7 ”, “w ”, “0 ” or

“

-” appears, see P.102 for information

before formatting the xD-Picture Card.

01 02

When the camera is in sleep mode, pressing the

shutter button down halfway wakes the camera up.

●

Pressing any other button as well as the shutter button wakes

the camera up.

The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it

is left unused for a set time (2 or 5 minutes).

Bebeep

２３４

ＩＭＡＧＥＤＩＳＰ．：ＯＮＩＭＡＧＥＤＩＳＰ．：ＯＮ

ＰＯＷＥＲＳＡＶＥ２ＭＩＮＰＯＷＥＲＳＡＶＥ２ＭＩＮ

ＦＯＲＭＡＴ：ＯＫＦＯＲＭＡＴ：ＯＫ

ＬＣＤ：ＯＮＬＣＤ：ＯＮ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＳＥＴＳＥＴＣＡＮＣＥＬＣＡＮＣＥＬ

SET-UP

■ SET-UP menu options

IMAGE DISP.

ON/OFF ON

Specifies whether the preview images (the photographed

images) are displayed after taking a picture.

The image appears for a few moments and is then recorded.

–

POWER SAVE

2 MIN/5MIN 2 MIN

Reduces the camera’s power consumption and sets the

time when camera turns off.

FORMAT OK – Erases all files.

q LCD

ON/OFF ON

Specifies whether the LCD monitor is ON or OFF when the

camera is turned on in Photography mode.

§ BEEP

OFF/1/2/3 2

Sets the volume of the tone emitted when the camera

controls are used.

§ SHUTTER

OFF/1/2/3 2

Sets the volume of the sound emitted when the shutter operates.

DATE/TIME SET – Corrects the date or time.

TIME

DIFFERENCE

SET – Specifies the time difference settings.

FRAME NO. CONT./RENEW CONT.

Specifies whether frame numbers are assigned

consecutively from previous numbers or begin again.

START-IMAGE

ON/OFF OFF

Specifies whether the startup screen appears on the LCD

monitor when the camera is turned on.

ENGLISH Specifies the language used for LCD monitor display.

VIDEO SYSTEM

NTSC/PAL – Specifies whether video output is set to NTSC or PAL.

q RESET

OK –

Resets all the camera settings (other than the DATE/TIME,

TIME DIFFERENCE, LANG. and VIDEO SYSTEM) to the

factory default values set at shipment. A confirmation

message appears when you press “c”. To reset the camera

settings, press the “MENU/OK” button again.

Settings Display

Factory default

Explanation

page

100DISCHARGE OK – Discharges rechargeable batteries.

USB MODE

¶/q WEB/®

: DSC (Mass storage device) mode

This mode provides a simple way to read images from an

xD-Picture Card and store images onto an xD-Picture

Card.

WEB: WEB CAM (WEB Camera) mode

This function allows you to conduct videoconferencing

sessions between PCs connected to the Internet.

✽ Windows XP SP1 only

: PictBridge

If a printer that supports PictBridge is available, images can

be printed by connecting the camera directly to the

PictBridge-compatible printer without using a computer.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Comments to this Manuals

No comments

Fujifilm FinePix E500 User Manual Page 36

Comments to this Manuals