Fujifilm 3000 User Manual download pdf (Page 21)

1. Cut away or fold back the excess margin

area of the first sheet, using the cutting

marks provided as a guide.

2. Align the first output sheet with the

second one so that the edge of the first is

against the cutting marks of the second,

and so the printed images of both halves

are properly lined up. Once one sheet has

been laid over the other, fix lightly into

place by applying tape to both ends of the

output sheets.

3. Apply a longer strip of tape over the tapes

first applied and cut away any excess

when both halves of the output have been

fixed together.

Pasting two output sheets together

• Discoloration and fading may result depending on the type of

tape used.

• The cutting marks are to be used as guides when cutting.

• If the left and right sides do not align properly, adjust the image of

one side so that they do.

Cut or fold

Lightly apply tape

to hold in place

Apply tape to

fix into place

The right half of the

original will then be

printed. When the printing

process is complete, cut

the print with the cutter.

cutting mark

When printing in divisions, cutting

marks are automatically printed on the

output.

Insert the original

once more into the

document bay, making

sure it faces the same

direction. Press the start/

stop key to begin printing

the right side of the

original.

Note that the two halves will

not be aligned properly if the

original is not placed correctly

into the document bay.

Paste the two sides of

the print together to

form a single poster.

If you wish to print only the right side of

the original, press the output size key

until 44x58

appears on the message

display, and then press the start/stop key.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Comments to this Manuals

No comments

Fujifilm 3000 User Manual Page 21

Comments to this Manuals