Fujifilm 40002 User Manual download pdf (Page 28)

3. INSTALLATION

4. Click the [Add Port] button.

The [Printer Ports] dialog box is displayed.

5. Click the [New Port Type].

The [Installing Print Monitor] dialog box is displayed.

6. Enter the following location in the [Copy files from:] field.

For the CE type, enter:

E:\Driver\PG3500\Win2k_XP\English\CE (for 3500)

E:\Driver\PG4K2_4500\Win2k_XP\English\CE (for 4000

4500)

(* if your CD-ROM drive is E: drive)

For the UC type, enter:

E:\Driver\PG3500\Win2k_XP\English\UC (for 3500)

E:\Driver\PG4K2_4500\Win2k_XP\English\UC (for 4000

4500)

(* if your CD-ROM drive is E: drive)

Click the [OK] button.

The following appears.

7. Confirm that [FUJIFILM PICTRO TCP Port] appears in the

[Available Port types;] field, and then click the [New Port]

button. After a file copy operation is performed, the following

dialog box appears:

8. Specify the port name as directed below:

Enter a numerical value between 1 and 99 to specify the port

name. Although the default port name (numerical value) is

displayed, you can change it by entering a new port name

(numerical value).

When the port name is determined, click the [OK] button.

The following dialog box appears:

9. Specify the output destination IP address as directed below:

Enter the IP address of the PICTROGRAPHY network adapter

to specify the output destination, and then click the [OK] button.

When you are returned to the dialog box shown in Step 6., click

the [Close] button.

10. The following is displayed when the file is copied.

11. Confirm that [PICTRO TCPx:] (x: numerical value entered as

the port name) appears in [Ports on This Server], and then

click the [Close] button.

This completes the installation of [PICTRO TCP Port].

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

No comments

Fujifilm 40002 User Manual Page 28