Fujifilm S5 Owner's Manual download pdf (Page 73)

Advanced Features — Photography

Aperture-priority auto

In this mode, the photographer sets the aperture

(minimum aperture to maximum aperture) and the

camera automatically controls the shutter speed. This

mode is best for photographs where the priority is on the

depth of field (the area where objects are in focus), such

as shots where both near and distant objects are in clear

focus (minimum apertures) or where the background is

out of focus (maximum apertures).

AWhile pressing MODE, rotate the main-command dial

until is displayed in the control panel.

BRotate the sub-command dial to choose the desired

aperture.

CFrame a photograph, focus, and shoot.

MEMO

• When a non-CPU lens is attached and if the maximum

aperture of the lens has been specified in the [NON-

CPU LENS DATA] under [ MISC.] (➝p.121) in the

[SET UP] menu, the current f/-number will be displayed

in the control panel and viewfinder, rounded to the

nearest full stop. Otherwise the aperture displays will

show only the number of stops ( , with maximum

aperture displayed as ) and the f/-number must be

read from the lens aperture ring.

• If the limits of the exposure metering system are

exceeded, one of the following indicators will be

displayed in the control panel and viewfinder:

: Subject too bright. Choose smaller aperture

(larger f/-number) or ISO sensitivity (➝p.92), or use

optional neutral density (ND) filter.

: Subject too dark. Choose larger aperture (smaller

f/-number) or higher ISO sensitivity (➝p.92), or use

flash.

• If aperture ring of CPU lens (except G type) is not set to

minimum aperture, blinks in the control panel and

viewfinder. In this case, the shutter cannot be released

regardless of the exposure mode selected.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 243 244

No comments

Fujifilm S5 Owner's Manual Page 73