Fujifilm FinePix4800Zoom User Manual download pdf (Page 50)

SETTING THE STARTUP SCREEN

SET–UP

AUTO POWER SAVE

SET–UP

When you switch the camera on, the startup

screen set here appears on the LCD monitor.

➀

When you select “SET STARTUP SCREEN”,

the stored screens are displayed.

➁

Use “d” or “ c” to select the image to be set.

➂

Press the “MENU/OK” button to set the image.

➀

The setting confirmation screen appears.

➁

Press the “MENU/OK” button.

1 2

Set the “SET STARTUP SCREEN” setting in

the SET–UP menu to “ON” (➡P.92).

Once you enable this function, the monitor is

temporarily switched off to reduce power

consumption (Sleep mode) if the camera is not

used for about 30 seconds. If the camera is then

left unused for a further time (2 or 5 minutes), it

is automatically switched off. Use this function

when you want to get the maximum possible

running time from the battery.

When the camera is in sleep mode, pressing the

shutter button down halfway brings the camera

back to full operational mode. This is a useful

feature as it allows you to take pictures more

quickly than switching the camera off and then

on again.

●

Operation can also be restored by pressing buttons

other than the shutter button.

●

When the camera is in Sleep mode, “FinePix” is

displayed on the display panel.

●

Auto Power Save is disabled during automatic

playback and when a USB connection is being used.

The Sleep function does not operate when the LCD

monitor is switched off or when the camera is in

Setup or Playback mode. However, if the camera

controls are not used for some time (2 minutes or 5

minutes), the camera automatically switches off.

●

➀

●

➀

●

➁

●

➁

●

➂

●

Because the startup screen is displayed in a frame,

part of the image is obscured by the frame.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 66 67

Comments to this Manuals

No comments

Fujifilm FinePix4800Zoom User Manual Page 50

Comments to this Manuals

Related products and manuals for Bridge cameras Fujifilm FinePix4800Zoom