Fujifilm FinePix F11 User Manual download pdf (Page 12)

Using the Camera

Bebeep

●

The image shown on the LCD monitor before the picture is

taken may differ in brightness, color, etc. from the image

actually recorded. Play back the recorded image to check it

(➡P.27).

Use the LCD monitor to frame the shot so that the

subject fills the entire AF (Autofocus) frame.

Press the shutter button down halfway. When a

short double-beep is heard, the camera focuses on

your subject. The AF frame on the LCD monitor

becomes smaller and the camera sets the shutter

speed and aperture. The indicator lamp (green)

changes from blinking to lit.

●

When a short double-beep is not heard and “{” appears on

the LCD monitor, the camera cannot focus.

●

Pressing the shutter button down halfway freezes the image

on the LCD monitor briefly. This image is not the recorded

image.

●

When “{” appears on the LCD monitor (the shooting

condition is too dark to focus on the subjects etc.), press

again the shutter button down halfway or try standing about

2 m (6.6 ft.) from your subject to take the picture.

Before the flash fires, “∑” appears on the LCD monitor. When selecting a slow shutter speed that

will cause camera shake, “

|” appears on the LCD monitor. Use the flash to take pictures.

According to the scene or mode being shot, use a tripod.

NNN

10101010

250250250 F5.6F5.6F5.6

AF frame

Press the shutter button down fully. When a

clicking sound is heard, the camera records the

image.

●

There is a slight delay between the shutter button being

pressed and the picture being taken. Play back the shot to

check the image.

●

When pressing the shutter button down fully in one motion,

the camera takes the picture without the AF frame changing.

●

When taking a picture using the flash, the image may

disappear and go dark briefly due to flash charging. The

indicator lamp blinks orange during charging.

●

See P.116-117 for information on the warning displays.

Click

◆

Subjects not suitable for autofocus

◆

FinePix F11 uses a high-precision autofocusing mechanism. However, it may have difficulty focusing

on the following:

h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass

h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects

h Fast moving subjects

h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is

either closer or further away than your subject

(such as a shot of someone against a

background with strongly contrasting

elements)

For such subjects use AF/AE lock (➡P.25).

1Press the “POWER” button to turn the camera

on.

2Set the Mode switch to “B”.

h Focal range

Approx. 60 cm (2.0 ft.) to infinity

Brace your elbows against your sides and hold the

camera with both hands. Position your right thumb

so that it is handy for using the zoom.

●

Moving the camera while shooting gives a blurred picture

(camera shake). Use a tripod to prevent camera shake,

particularly for shots in the dark when the selected flash

mode is Suppressed flash.

●

There may be some uneven brightness at the lower edge of

the LCD monitor. This is normal and does not affect the

photographed image.

Hold the camera so that your fingers or the strap do

not cover the lens, flash and AF-assist illuminator.

If the lens, flash or AF-assist illuminator is obscured

by your fingers or the strap, subjects may be out of

focus or the brightness (exposure) of your shot may

be incorrect.

●

Check that the lens is clean. If it is dirty, clean the lens as

informed on P.113.

●

If the flash is used in dusty conditions or when it is snowing,

white dots may appear in the image due to flash reflecting off

the dust particles or snowflakes. Use Suppressed flash mode

(➡P.46) to fix the problem.

Press “T” (telephoto) button to zoom in. Press “W”

(wide-angle) button to zoom out. A zoom bar

appears on the LCD monitor.

h Optical zoom focal length

(35 mm camera equivalent)

Approx. 36 mm to 108 mm

(

„: Approx. 37 mm to 111 mm)

Max. zoom scale: 3×

●

See P.90 for information on procedures for using Digital

zoom.

Zoom barZoom barZoom bar

NNN

10101010

●

Use Macro mode for subjects closer than 60 cm (2.0 ft.)

(➡P.44).

●

When [CARD ERROR], [CARD NOT INITIALIZED], [CARD

FULL] or [NO CARD] appears, see P.116.

TAKING PICTURES

(

B AUTO MODE

)

PHOTOGRAPHY MODE

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 66 67

Comments to this Manuals

No comments

Fujifilm FinePix F11 User Manual Page 12

Comments to this Manuals

Related products and manuals for Bridge cameras Fujifilm FinePix F11